Pool Frog Bac Pac - Poolstoreconnect
    Pool Frog Bac Pac - Poolstoreconnect
Pool Frog Bac Pac - Poolstoreconnect
Pool Frog Bac Pac - Poolstoreconnect
    Pool Frog Bac Pac - Poolstoreconnect
Pool Frog Bac Pac - Poolstoreconnect

About

Description

Pool Frog Bac Pac

 

Description

Pool Frog's Bac Pac provides pool owners with a way to supply chlorine to their systems slowly and steadily, enabling maximum chlorine effectiveness. Bac Pac is a cartridge insert that works with all Frog and Cycler systems to provide a way to eliminate constant hand feeding of chlorine on a daily basis to maintain pool health as well as saving considerable time and money with this more efficient, self-contained system.

 

Directions

  1. Adjust pH level to 7.2-7.8.
  2. Bring free available chlorine residual to 1 ppm using a chlorine shock.
  3. Stabilize the pool with cyanuric acid stabilizer.
  4. To Install Bac Pac: Take Pool Frog Cycler cap off. Remove pac colored caps. Hold pac so the open end faces down. Insert into Pool Frog Mineral Reservoir. The end of the pac must align with the key located inside the Pool Frog Cycler at the bottom. Do not force. Replace the feeder cap and set the control dial per the size and pump run time of your pool according to the chart in the manual included with the the Pool Frog Mineral Reservoir. Monitor chlorine level daily for the first week to determine correct dial setting. Turn the control dial to the next higher setting to increase the free available chlorine and turn it to the next lower setting to lower the free available chlorine. Check the free available chlorine residual and increase/decrease one setting per day until you have achieved at least 0.5 ppm
  5. Once you have determined the proper setting for your pool, you should not have to re-adjust the setting under normal conditions. Should conditions change (i.e. weather, rain, pool use, bather load, etc.) the control dial can be easily adjusted to increase or decrease the chlorine feed.
  6. Superchlorinate if needed. Do not shock treat the skimmer. Turn control dial to Minimum or Setting 0 before super-chlorinating. Once desired free available chlorine has been obtained, return the control dial to the normal operating setting.
  7. Periodically check the pac and replace with a new one when empty. Do not attempt to open or refil this pac. Do not reuse.
Description

Pool Frog Bac Pac

 

Description

Pool Frog's Bac Pac provides pool owners with a way to supply chlorine to their systems slowly and steadily, enabling maximum chlorine effectiveness. Bac Pac is a cartridge insert that works with all Frog and Cycler systems to provide a way to eliminate constant hand feeding of chlorine on a daily basis to maintain pool health as well as saving considerable time and money with this more efficient, self-contained system.

 

Directions

  1. Adjust pH level to 7.2-7.8.
  2. Bring free available chlorine residual to 1 ppm using a chlorine shock.
  3. Stabilize the pool with cyanuric acid stabilizer.
  4. To Install Bac Pac: Take Pool Frog Cycler cap off. Remove pac colored caps. Hold pac so the open end faces down. Insert into Pool Frog Mineral Reservoir. The end of the pac must align with the key located inside the Pool Frog Cycler at the bottom. Do not force. Replace the feeder cap and set the control dial per the size and pump run time of your pool according to the chart in the manual included with the the Pool Frog Mineral Reservoir. Monitor chlorine level daily for the first week to determine correct dial setting. Turn the control dial to the next higher setting to increase the free available chlorine and turn it to the next lower setting to lower the free available chlorine. Check the free available chlorine residual and increase/decrease one setting per day until you have achieved at least 0.5 ppm
  5. Once you have determined the proper setting for your pool, you should not have to re-adjust the setting under normal conditions. Should conditions change (i.e. weather, rain, pool use, bather load, etc.) the control dial can be easily adjusted to increase or decrease the chlorine feed.
  6. Superchlorinate if needed. Do not shock treat the skimmer. Turn control dial to Minimum or Setting 0 before super-chlorinating. Once desired free available chlorine has been obtained, return the control dial to the normal operating setting.
  7. Periodically check the pac and replace with a new one when empty. Do not attempt to open or refil this pac. Do not reuse.
King Technology by King Technology

Pool Frog Bac Pac

Regular price
$31.95
Sale price
$31.95
Regular price
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.
Investor focus research & development value proposition graphical user interface investor. Startup business plan user experience.

FREE SHIPPING over $50 - Use Code SHIP50 at Checkout*

Check Out These Related Products